Advertisement
Quick Links
THEMIS series
Operation/Installation Manual
ALVIS TETRA
ALVIS TETRA
GF-ALV-T
Contents
Thank you for purchasing our product.
Please read through this manual carefully
beforeinstalling or using.
After reading, keep this operation manual
in a safe place for your future reference.
Version 1
2
3
4
5
8
8
9
June 2016
Advertisement
Related Manuals for Takara Belmont ALVIS TETRA
Summary of Contents for Takara Belmont ALVIS TETRA
-
Page 1: Table Of Contents
THEMIS series ALVIS TETRA Operation/Installation Manual Contents General Safety Instructions Preparation Before Installation Parts Lists/Accessory Parts Installation Procedure How to use Care and Maintenance Specification Drawings Thank you for purchasing our product. ALVIS TETRA Please read through this manual carefully GF-ALV-T beforeinstalling or using. -
Page 2: General Safety Instructions
General Safety Instructions Before use Please read through the "General Safety Instructions" to ensure you use this product correctly. This instruction manual contains important information to help avoid personal injury, or property damages to you or your cus- tomers. All instructions are important for safe operation. Please be sure to observe them. Definition of markings This mark warns the user that "improper use may cause death or severe personal injury". -
Page 3: Preparation Before Installation
CAUTION Do NOT use the equipment outdoors. Remove chemical immediately after attached. This equipment is neither design for nor approved for If chemical such as hair dye, comes in contact with the outside installation. If installed outdoors, there may be equipment, wipe it off immediately.This may cause a danger of a fire, electric shock, or failure. -
Page 4: Parts Lists/Accessory Parts
Parts List/Accessory Parts ALVIS TETRA LED cable Mirror x2 Frame Desk Power plug x4 Front panel x2 Power plug for LED Cable for outlet x4 LED switch Cabinet Power outlet (double x2) [Accessory parts] Dryer holder Wood screw for frame... -
Page 5: Installation Procedure
Installation Procedure Position Cabinet in the desired location. Before placing Desk, take off the wood covers on underneath(these are fixed by wood screws) then take out the cables. 3 Connect Power plugs on Cabinet and Desk then lower Desk on Cabinet. - Page 6 Pass LED cable through the hole on Desk. Fix Frame with 6x wood screws. Then connect the LED cable. LED cable Connect the LED cable 5 Secure 2 x Mirror to Frame carefully. 6 Wire Power plugs.(See recommended position on page.9 / Plug is NOT provided.)
-
Page 7: How To Use
How to Use Using power outlet PANDORA Power outlets are provided on the both sides. The total current of the power outlets are as follows. Total 13A Total 13A or less or less Care and Maintenance Dust the surface and remove stain. Wipe the surface with soft and dry cloth. -
Page 8: Specification Drawings
Provide 2 x power supply (13A or more / AC 230V ) each on the floor. (Total 4 power supplies needed) Top view 2200 TAKARA BELMONT (UK) LTD. BELMONT HOUSE, ONE ST.ANDREWS WAY, BOW LONDON E3 3PA, UK http:// www.takara.co.uk... - Page 9 Fix 4 x Dryer holder with wood screws. 150mm 150mm edge Bottom view...