Alcatel-Lucent OAW-AP120 Series Installation Manual page 3

Using the Desk Stand
To use the desk stand:
1. Attach the desk stand to the AP as follows:
a. Place the desk stand against the back of the AP, with the hinged support leg pointing away from
Figure 5 Attaching a Desk Stand
b. Twist the desk stand clockwise until it snaps into place in the slot guides.
2. Extend the hinged support leg and set the AP on a level surface (see
number on the front of the unit is upside down and that the Ethernet ports and power connector are
accessible at the top of the unit.
3. On the OAW-AP121 or OAW-AP125, extend the antennas. For best results, rotate the antennas so
that they are in the positions shown in
Figure 6 Antenna Orientation for a Desk-Mounted OAW-AP121 of OAW-AP125
OAW-AP120 Series AP Mounting Kit
the console port (see Figure
approximately 30 degrees to the slot guides.
| Installation Guide
5). Hold the desk stand so that the base plate is at an angle of
Figure 6.
ap12_012
Figure 6). Verify that the model
ap12_013
3