Nintendo 64 Installation Manual page 7

Nintendo 64 Power Supply Capacitor Replacement Kit Installation Guide Page 7 of 9
Step Three
In order to unsolder the fuse we recommend the following strategy. For the purposes of this guide the
following pictures are from a sample system and are not directly taken from the Nintendo 64 power
adapter.
Picture Three: Proper usage of soldering braid
Place the soldering braid over the solder joint and then heat the joint with your soldering iron. The braid
will suck up the solder and free the lead. You can also apply a small amount of traction on the lead by
grasping the lead from the other side with a set of needle nose pliers and pulling if needed.
Once the leads are unsoldered please proceed to the next step.
V 1.0