Dvd Settings And Adjustments - Sony SLV-D983P Service Manual

DVD Settings and Adjustments

Audio Setup
"Audio Setup" allows you to set the sound
according to the playback and connection
conditions.
Before you start...
• Set TV / DVD·VIDEO switch to
DVD·VIDEO on the remote (page 10).
1
Press SET UP when the DVD player is in stop
SET UP
mode, then press V/v to select
and press ENTER.
ENTER
Press V/v to select "Audio Setup," then press
2
ENTER.
ENTER
Press V/v to select the setup item from the displayed list:
3
"Dolby Digital," "MPEG," "DTS" or "Audio DRC."
ENTER
54
Audio Setup
• Audio DRC (Dynamic Range Control)
Makes the sound clear when the volume is turned down when playing a DVD that
conforms to "Audio DRC." This affects the output from the following jacks:
– OUT AUDIO L/R jacks
– DIGITAL AUDIO OUT (COAXIAL) jack only when "Dolby Digital" is set to "D-
PCM."
The default setting is indicated in bold print.
Standard Normally select this position.
Wide Range Gives you the feeling of being at alive performance.
Notes
• If you connect a component that does not conform to the selected audio signal, a loud noise
(or no sound) will come out from the speakers, affecting your ears or causing the speakers to
be damaged.
• Noise may occur in the LinearPCM double-speed audio. This is not a malfunction.
• Digital audio signal may not be output correctly if you set "MPEG" to "MPEG" in "AUDIO
SETUP" menu while playing a super VCD.
56
Audio Setup
SET UP
V/v/B/b
ENTER
DVD SETUP
(DVD)
Language Setup
Audio Setup
Screen Setup
Parental Setup
V v
RETURN SET UP
ENTER
AUDIO SETUP
Dolby Digital
[ D-PCM ]
MPEG [ PCM ]
DTS [ Off ]
Audio DRC [ Standard ]
V v B b
RETURN SET UP
1-13
Press B/b to select an item.
4
ENTER
5
Press SET UP to exit the menu.
SET UP
Menu choices
• Dolby Digital
Selects the type of Dolby Digital signal.
The default setting is indicated in bold print.
D-PCM
Select this when the player is connected to an audio component
lacking a built-in Dolby Digital decoder.
Dolby Digital Select this when the player is connected to an audio component
with a built-in Dolby Digital decoder.
• MPEG
Selects the type of MPEG audio signal.
The default setting is indicated in bold print.
PCM Select this when the player is connected to an audio component
lacking a built-in MPEG decoder. If you play MPEG audio sound
tracks, the player outputs stereo signals via the DIGITAL AUDIO
OUT (COAXIAL) jack.
MPEG Select this when the player is connected to an audio component
with a built-in MPEG decoder.
• DTS
Selects whether or not to output DTS signals.
The default setting is indicated in bold print.
Off Select this when the player is connected to an audio component
lacking a built-in DTS decoder.
On Select this when the player is connected to an audio component
with a built-in DTS decoder.
Screen Setup
"Screen Setup" allows you to set the screen
according to the playback and connection
conditions.
Before you start...
• Set TV / DVD·VIDEO switch to
DVD·VIDEO on the remote (page 10).
1
Press SET UP when the DVD player is in stop
SET UP
mode, then press V/v to select
and press ENTER.
ENTER
Press V/v to select "Screen Setup," then press
2
ENTER.
ENTER
Press V/v to select the setup item from the displayed list:
3
"TV Type," "DVD LINE1 RGB Out" or "DVD S-Video Out" or "DVD
ENTER Component Out".
To set the "Progressive" setting, see page 59.
continued
55
Audio Setup
SET UP
V/v/B/b
ENTER
DVD SETUP
(DVD)
Language Setup
Audio Setup
Screen Setup
Parental Setup
V v
ENTER RETURN SET UP
SCREEN SETUP
TV Type
[ 4:3 Letter Box ]
DVD LINE1 RGB Out [ Off ]
DVD S-Video Out [ On ]
DVD Component Out On
[ ]
Progressive [ Off ]
V v B b
RETURN SET UP
continued
57
Screen Setup