Samsung IPOLIS SNC-570 User Manual page 120

Network Camera SNC-570
If there are problems in operation, please refer to the items
below. If the problem persists, please contact the agent you
purchased this product from.
Problem
Nothing appears on
the screen.
The video image is
not clear.
The screen is dark.
114
Solution
Please check the power connection.
Please check the video signal line
connection.
Please check and make sure that the
auto lens switch is set to DC (VIDEO)
when using a DC(VIDEO) lens.
Open MS-DOS window to check whether
SNC-570 network camera is connected
to network.
※ In case of ping 192.168.1.100, replace
it with IP address set up at server
Please check if the lens is clean. Please
clean the lens with a clean cloth or brush.
Please adjust the contrast feature of the
monitor.
Please make sure that the screen is not
exposed directly to a bright light. Please
move the camera if necessary.
Please readjust the back focus of the
camera.
Please adjust the contrast feature of the
monitor.
If you have an intermediate device, set
the 75Ω/Hi-z properly, and check the
terminals.
Please check if an auto iris lens is being
used and adjust the brightness level.