Acl; Ip Acl - D-Link DWC-1000 User Manual

Section 4 - Advanced WLAN Configuration
Access Control Lists (ACLs) ensure that only authorized users have access to specific resources while blocking
off any unwarranted attempts to reach network resources. ACLs are used to provide traffic flow control, restrict
contents of routing updates, decide which types of traffic are forwarded or blocked, and above all, provide
security for the network.
Path: Wireless > ACL > IP ACL
IP Access control Lists (ACLs) allow the network managers to define classification actions and rules for specific
ports. ACLs are composed of rules that consist of the filters that determine traffic classifications. An IP ACL consists
of a set of rules which are matched sequentially against a packet. When a packet meets the match criteria of a
rule, the specified rule action (Permit/Deny) is taken and the additional rules are not checked for a match. Rules
for the IP ACL are specified/created using the IP ACL Rule Configuration menu.
To configure IP ACL:
1. Go to Wireless > ACL > IP ACL page.
2. Click Add New IP ACL, fill-in the fields (refer to the table below), and click Save.
D-Link DWC-1000 User Manual

ACL

IP ACL

70