Tri-Zone Climate Control System; Using Automatic Climate Control - Honda Odyssey 2018 Owner's Manual

Climate Control System

Tri-zone climate control system

Using Automatic Climate Control

The automatic climate control system maintains the interior temperature you select.
The system also selects the proper mix of heated or cooled air that raises or lowers
the interior temperature to your preference as quickly as possible.
Mode Control Icon
(Air flows from
dashboard vents)
Fan Control Icon
A/C (Air Conditioning)
Icon
AUTO Button
(On/Off) Button
FRONT
CLIMATE
Button
Driver's Side
Temperature
Control switch
Use the system when the engine is running.
1. Press the AUTO button.
2. Adjust the interior temperature using the driver's side or passenger's side control
switch.
3. Press the button to cancel.
252
Mode Control Icon
(Air flows from
floor vents)
Mode Control Icon
(Air flows from
floor and
windshield
defroster vents)
Mode Control Icon (Air flows from
floor and dashboard vents)
SYNC (Synchronized) Button
Fan Control Button
(Recirculation) Button
Passenger's
Side
Temperature
Control switch
1Using Automatic Climate Control
Press the FRONT CLIMATE button to display A/C,
MODE, fan control information on the audio/
information screen for several seconds. Select icon to
turn on or off A/C, change the vent mode, or change
the fan speed.
Models with Auto Idle Stop
During idle-stops, air-conditioning is suspended, and
only the blower remains active. If you do not want
air-conditioning suspended, press
stop.
If any buttons are pressed while using the climate
control system in auto, the function of the button
that was pressed will take priority.
The AUTO indicator will go off, but functions
unrelated to the button that were pressed will be
controlled automatically.
To prevent cold air from blowing in from outside, the
fan may not start immediately when the AUTO
button is pressed.
If the interior is very warm, you can cool it down
more rapidly by partially opening the windows,
turning the system on AUTO, and setting the
temperature to low. Change the fresh mode to
recirculation mode until the temperature cools down.
When you set the temperature to the lower or upper
limit, Lo or Hi is displayed.
to cancel idle-