1. Manuals
  2. Brands
  3. Hyundai Manuals
  4. Network Hardware
  5. DS-9600
  6. Quick operation manual

Hyundai DS-9600 Quick Operation Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
DS-9600/ 8600/ 7700/ 7600
Series NVR
Quick Operation Guide
UD.7L0202B1023A02

Advertisement

Table of Contents
loading

Summary of Contents for Hyundai DS-9600

  • Page 1 DS-9600/ 8600/ 7700/ 7600 Series NVR Quick Operation Guide UD.7L0202B1023A02...

  • Page 2: Table Of Contents

    Quick Operation Guide of DS-9600/8600/7700/7600 Series NVR TABLE OF CONTENTS NVR Pre-Installation ............................2 NVR Installation .............................. 2 Hard Disk Installation ............................. 2 Front Panel ............................... 6 Rear Panel ..............................13 Peripheral Connections ..........................17 Wiring of Alarm Input / Output ........................ 17 Using of Alarm Connectors ........................

  • Page 3: Nvr Pre-Installation

    DS-9608NI-RT, DS-9616NI-RT, DS-9632NI-RT, DS-9664NI-RT, DS-9616NI-XT, DS-9632NI-XT and DS-9664NI-XT series NVR. NVR Pre-Installation The DS-9600/8600/7700/7600NI-ST, DS-9600NI-RT/XT and DS-7700/7600NI-SP series NVR are highly advanced surveillance equipment that should be installed with care. Please take into consideration the following precautionary steps before installation of the NVR.
  • Page 4 Quick Operation Guide of DS-9600/8600/7700/7600 Series NVR 3. Press the buttons on the panel of two sides and open the front panel. 4. Insert the hard disk along the slot until it is placed into position. 5. Repeat the above steps to install other hard disks onto the NVR. After having finished the installation of all hard disks, close the front panel and lock it with the key again.
  • Page 5 Quick Operation Guide of DS-9600/8600/7700/7600 Series NVR 2. Install the HDD in the HDD rack using the provided screws. Fasten the screws on the button to fix the HDD. 3. Connect one end of the data cable to the motherboard of NVR and the other end to the HDD.
  • Page 6 Quick Operation Guide of DS-9600/8600/7700/7600 Series NVR Remove the cover from the NVR by unfastening the screws on the rear and side panel. Connect one end of the data cable to the motherboard of NVR and the other end to the HDD.

  • Page 7: Front Panel

    Quick Operation Guide of DS-9600/8600/7700/7600 Series NVR Front Panel DS-9600NI-ST/RT DS-9600NI-XT DS-8600NI-ST Name Function Description ALARM Turns red when a sensor alarm is detected. Ready LED is normally blue, indicating that the device is READY functioning properly. Turns blue when device is controlled by an IR remote.
  • Page 8 Quick Operation Guide of DS-9600/8600/7700/7600 Series NVR Name Function Description The LED turns off when the device is unarmed. The arm/disarm status can be changed by pressing and holding on the ESC button for more than 3 seconds in live view mode.
  • Page 9 Quick Operation Guide of DS-9600/8600/7700/7600 Series NVR Name Function Description In synchronous playback mode, it is used to switch between channels. Press the button will help you return to the Main menu (after successful login). Press and hold the button for 5 seconds will turn off audible key beep.
  • Page 10 Quick Operation Guide of DS-9600/8600/7700/7600 Series NVR DS-7700NI-ST/SP Name Function Description POWER Turns green when NVR is powered up. READY The LED is green when the device is running normally. The light is green when the IR remote control is enabled;...
  • Page 11 Quick Operation Guide of DS-9600/8600/7700/7600 Series NVR Name Function Description The F1 button when used in a list field will select all items in the list. In PTZ Control mode, it will turn on/off PTZ light and when the image is zoomed in, the key is used to zoom out.
  • Page 12 Quick Operation Guide of DS-9600/8600/7700/7600 Series NVR DS-7600NI-ST/SP: Name Function Description USB Interface Connects USB mouse or USE flash memory devices. POWER: the POWER LED turns green when NVR is powered READY: The LED is green when the device is running normally.
  • Page 13 Quick Operation Guide of DS-9600/8600/7700/7600 Series NVR Enter numeral “7”; Enter letters “PQRS”; 7/PQRS/REC Open the manual record interface. Enter numeral “8”; Enter letters “TUV”; 8/TUV/PTZ Access PTZ control interface. Enter numeral “9”; Enter letters “WXYZ”; 9/WXYZ/PREV Multi-channel display in live view.

  • Page 14: Rear Panel

    Quick Operation Guide of DS-9600/8600/7700/7600 Series NVR Rear Panel DS-9600NI-ST/RT DS-9600NI-XT DS-8600NI-ST DS-7700NI-ST Item Description VIDEO OUT BNC connector for video output. CVBS AUDIO OUT BNC connector for audio output. This connector is synchronized with CVBS video output. VGA AUDIO OUT...
  • Page 15 Quick Operation Guide of DS-9600/8600/7700/7600 Series NVR Item Description VGA video output. LINE IN BNC connector for audio input. RS-232 Interface Connector for RS-232 devices. DB9 connector for VGA output. Display local video output and menu. HDMI HDMI video output connector.
  • Page 16 Quick Operation Guide of DS-9600/8600/7700/7600 Series NVR Up position shows the RS-485 is not terminated. Down position shows the RS-485 is terminated with 120Ω resistance. RS-485 Interface Connector for RS-485 devices. T+ and T- pins connect to R+ and R- pins of PTZ receiver respectively.
  • Page 17 Quick Operation Guide of DS-9600/8600/7700/7600 Series NVR DS-7600NI-SP Item Description Network Interfaces with Network interface for the cameras and to provide power over Ethernet. PoE function VIDEO OUT BNC connector for video output. AUDIO OUT BNC connector for audio output.

  • Page 18: Peripheral Connections

    Quick Operation Guide of DS-9600/8600/7700/7600 Series NVR Peripheral Connections Wiring of Alarm Input / Output The alarm input/output interface of the NVR is shown as below: The alarm input is an open/closed relay. If the input is not an open/closed relay, follow the connection diagram...

  • Page 19: Controller Connection

    Quick Operation Guide of DS-9600/8600/7700/7600 Series NVR Controller Connection To connect a controller to the NVR: Disconnect pluggable block from the KB terminal block. Unfasten stop screws from the KB D+, D- pluggable block, insert signal cables into slots and fasten stop screws.

  • Page 20: Specifications

    Quick Operation Guide of DS-9600/8600/7700/7600 Series NVR Specifications Specifications of DS-9600NI-ST DS-9608NI DS-9616NI- DS-9632NI- DS-9664NI- Model IP video input 8-ch 16-ch 32-ch 64-ch Video/Audio input 1-ch, BNC (2.0 Vp-p, 1kΩ) Two-way audio Recording 5MP /3MP /1080P /UXGA /720P /VGA /4CIF /DCIF /2CIF /CIF...
  • Page 21 Quick Operation Guide of DS-9600/8600/7700/7600 Series NVR Specifications of DS-9600NI-RT DS-9608NI- DS-9616NI- DS-9632NI- DS-9664NI- Model IP video input 8-ch 16-ch 32-ch 64-ch Video/Audio input 1-ch, BNC (2.0 Vp-p, 1kΩ) Two-way audio Recording 5MP /3MP /1080P /UXGA /720P /VGA /4CIF /DCIF /2CIF /CIF...
  • Page 22 Quick Operation Guide of DS-9600/8600/7700/7600 Series NVR Specification of DS-9600NI-XT Model DS-9616NI-XT DS-9632NI-XT DS-9664NI-XT IP video input 16-ch 32-ch 64-ch Video/Audio input 1-ch, BNC (2.0 Vp-p, 1kΩ) Two-way audio Recording 5MP /3MP /1080P /UXGA /720P /VGA /4CIF /DCIF /2CIF /CIF /QCIF...
  • Page 23 Quick Operation Guide of DS-9600/8600/7700/7600 Series NVR Specifications of DS-8600NI-ST DS-8608NI DS-8616NI- DS-8632NI- DS-8664NI- Model IP video input 8-ch 16-ch 32-ch 64-ch Video/Audio input 1-ch, BNC (2.0 Vp-p, 1kΩ) Two-way audio Recording 5MP /3MP /1080P /UXGA /720P /VGA /4CIF /DCIF /2CIF /CIF...
  • Page 24 Quick Operation Guide of DS-9600/8600/7700/7600 Series NVR Specification of DS-7700NI-ST Model DS-7708NI-ST DS-7716NI-ST DS-7732NI-ST IP video input 8-ch 16-ch 32-ch Video/Audio input 1-ch, BNC (2.0 Vp-p, 1kΩ) Two-way audio Recording 5MP /3MP /1080P /UXGA /720P /VGA /4CIF /DCIF /2CIF /CIF...
  • Page 25 Quick Operation Guide of DS-9600/8600/7700/7600 Series NVR Specification of DS-7700NI-SP Model DS-7708NI-SP DS-7716NI-SP DS-7732NI-SP IP video input 8-ch 16-ch 32-ch Video/Audio input 1-ch, BNC (2.0 Vp-p, 1kΩ) Two-way audio Recording 5MP /3MP /1080P /UXGA /720P /VGA /4CIF /DCIF /2CIF /CIF...
  • Page 26 Quick Operation Guide of DS-9600/8600/7700/7600 Series NVR Specifications of DS-7600NI-ST Model DS-7608NI-ST DS-7616NI-ST IP video input 8-ch 16-ch Video/Audio input 1-ch, BNC (2.0 Vp-p, 1kΩ) (Two-way audio) Audio in Recording 5MP /3MP /1080P /UXGA /720P /VGA /4CIF /DCIF /2CIF /CIF...
  • Page 27 Quick Operation Guide of DS-9600/8600/7700/7600 Series NVR Specifications of DS-7600NI-SP Model DS-7608NI-SP DS-7616NI-SP IP video input 8-ch 16-ch Video/Audio input 1-ch, BNC (2.0 Vp-p, 1kΩ) (Two-way audio) Audio in Recording 5MP /3MP /1080P /UXGA /720P /VGA /4CIF /DCIF /2CIF /CIF...

  • Page 28: Hdd Storage Calculation Chart

    Quick Operation Guide of DS-9600/8600/7700/7600 Series NVR HDD Storage Calculation Chart The following chart shows an estimation of storage space used based on recording at one channel for an hour at a fixed bit rate. Bit Rate Storage Used 128K...

  • Page 29: Menu Operation

    Quick Operation Guide of DS-9600/8600/7700/7600 Series NVR Menu Operation Menu Structure The menu structure of the DS-9600/8600/7700/7600NI-ST, DS-9600NI-XT and DS-7700/7600NI-SP Series NVR: The menu structure of the DS-9600NI-RT Series NVR:...

  • Page 30: Startup And Shutdown

    Quick Operation Guide of DS-9600/8600/7700/7600 Series NVR Startup and Shutdown Proper startup and shutdown procedures are crucial to expanding the life of the NVR. To start your NVR: 1. Check the power supply is plugged into an electrical outlet. It is HIGHLY recommended that an Uninterruptible Power Supply (UPS) be used in conjunction with the device.
  • Page 31 Quick Operation Guide of DS-9600/8600/7700/7600 Series NVR Start Wizard Interface Operating the Setup Wizard: 2. The Setup Wizard can walk you through some important settings of the NVR. If you don’t want to use the Setup Wizard at that moment, click the Cancel button. You can also choose to use the Setup Wizard next time by leaving the “Start wizard when NVR starts?”...
  • Page 32 Quick Operation Guide of DS-9600/8600/7700/7600 Series NVR Date and Time Settings 7. After the time settings, click Next button which takes you back to the Network Setup Wizard window. DS-9600NI-ST/RT/XT and DS-8600NI-ST DS-7600/7700NI-ST...
  • Page 33 Quick Operation Guide of DS-9600/8600/7700/7600 Series NVR DS-7600/7700NI-SP Network Configuration Note: Dual-NIC is only supported by DS-9600NI-ST/RT/XT and DS-8600NI-ST series device. And for DS-7600/7700NI-SP series NVR, the internal NIC IPv4 address should be configured for the cameras connecting to the PoE network interface of the NVR.
  • Page 34 Quick Operation Guide of DS-9600/8600/7700/7600 Series NVR HDD Management 10. To initialize the HDD, click the Init button. Initialization removes all the data saved in the HDD. 11. Click Next button. You enter the Adding IP Camera interface. 12. Click Search to find online IP Camera. Select the IP camera to be added, and click the Add button.

  • Page 35: Live View

    Quick Operation Guide of DS-9600/8600/7700/7600 Series NVR Record Settings 14. Click Copy to copy the settings to other channels. Copy Record Settings 15. Click OK to complete the startup Setup Wizard. Live View Some icons are provided on screen in Live View mode to indicate different camera status. These icons include:...

  • Page 36: Adding And Configuring Ip Cameras

    Quick Operation Guide of DS-9600/8600/7700/7600 Series NVR Alarm & Record Adding and Configuring IP Cameras You should add and configure the online IP cameras to enable the live view and recording function. Adding IP Cameras You can search and add the online IP cameras by following the startup wizard, or according to the following steps.

  • Page 37: Configuring Basic Parameters Of Ip Cameras

    Quick Operation Guide of DS-9600/8600/7700/7600 Series NVR Configuring Basic Parameters of IP Cameras After the adding of the IP cameras, the basic information of the camera lists in the page, and you can configure the basic setting of the IP cameras.

  • Page 38: Ptz Control

    Quick Operation Guide of DS-9600/8600/7700/7600 Series NVR PTZ Control Follow the procedure to set the parameters for PTZ. The configuring of the PTZ parameters should be done before you set the PTZ camera. Before you start, please check that the PTZ and the NVR are connected properly through RS-485 interface.

  • Page 39: Playback

    Quick Operation Guide of DS-9600/8600/7700/7600 Series NVR Icon Description Icon Description Icon Description The speed of the Light on/off Wiper on/off PTZ movement Image 3D-Zoom Preset Centralization Patrol Pattern Menu Previous item Next item Start pattern/patrol Stop the patrol or...

  • Page 40: Backup

    Quick Operation Guide of DS-9600/8600/7700/7600 Series NVR Front Panel: press PLAY button to play back record files of the channel under single-screen live view. Under multi-screen live view, record files of the top left channel (not masked) will be played back.
  • Page 41 Quick Operation Guide of DS-9600/8600/7700/7600 Series NVR Quick Export using USB1-1 Check backup result. Choose the record file in Export interface and press button to check it. Checkup of Quick Export Result Using USB1-1 0203021030423...

This manual is also suitable for:

Ds-8600Ds-7700Ds-7600

Table of Contents