Campbell Hausfeld PW1520 Assembly Instructions And Parts List page 5

Instrucciones de Montaje y Lista de Piezas
System Connection
1. Inserte la lanza en la pistola y gírela en el
sentido de las agujas del reloj hasta que
llegue a su tope, como se muestra en la
Figura 4.
Figura 4 - Conexión de la pistola y lanza
2. Verifique que el interruptor de energía esté
en la posición "OFF" ("APAGADO").
3. Conecte la manguera de alta presión y el
conjunto de pistola en la unidad.
Interruptor
"On/Off"
(Encendido/
Apagado)
13 mm
Entrada
Manguera
de jardín
Figura 5
4. Conecte la manguera de jardín según se
explica en Instrucciones de conexión de la
manguera de jardín.
5. Enchufe el cordón de corriente en un toma-
corrientes de 120 V con conexión a tierra,
que se encuentre en un circuito dedicado.
6. Abra la llave del agua.
7. Presione el gatillo y manténgalo presionado
por 1 minuto para liberar la presión y
remover el aire atrapado en el sistema.
8. Mueva el interruptor "ON/OFF" ("ENCENDI-
DO/APAGADO") a la posición "ON"
("ENCENDIDO").
NOTA: PARA OBTENER INSTRUC-
CIONES DE OPERACIÓN, CONSULTE
EL MANUAL DEL PRODUCTO.
Cordón
eléctrico
Salida
Manguera de
alta presión
16 Sp
Assembly Instructions and Parts List
PW1520
High Pressure Operation
1. Make sure pressure washer is running.
2. Rotate indicator on cap to the
"On" position to apply soap
(Figure 9).
3. Pull back on black nozzle to
ensure lance is in high pressure
mode (Figure 10).
4. Twist nozzle cover to adjust
spray pattern from jet to wide
fan spray (Figure 11).
5. Before rinsing, move indicator
on cap to "OFF" position to shut off
soap (Figure 12).
Figure 11
Limited Warranty
1. DURATION: From the date of purchase by the original purchaser as follows: One Year.
2. WHO GIVES THIS WARRANTY (WARRANTOR): Campbell Hausfeld / Scott Fetzer Company, 100 Mundy Memorial Drive, Mt. Juliet,
TN, 37122, Telephone: (800) 330-0712
3. WHO RECEIVES THIS WARRANTY (PURCHASER): The original purchaser (other than for purposes of resale) of the Campbell
Hausfeld pressure washer.
4. WHAT PRODUCTS ARE COVERED UNDER THIS WARRANTY: Any Campbell Hausfeld Pressure Washer supplied or manufactured by
the Warrantor.
5. WHAT IS COVERED UNDER THIS WARRANTY: Substantial defects on material and workmanship which occur within the duration of
the warranty period with the exceptions noted below.
6. WHAT IS NOT COVERED UNDER THIS WARRANTY:
A. Implied warranties, including those of merchantability and FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED FROM THE DATE
OF ORIGINAL PURCHASE AS STATED IN THE DURATION. If this pressure washer is used for commercial, industrial or rental pur-
poses, the warranty will apply for ninety (90) days from the date of purchase. Some States do not allow limitation on how long
an implied warranty lasts, so the above limitations may not apply to you.
B. ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY DEFECT, FAIL-
URE, OR MALFUNCTION OF THE CAMPBELL HAUSFELD PRESSURE WASHER. Some States do not allow the exclusion or limitation
of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
C. Any failure that results from shipping damage, accident, purchaser's abuse, neglect or failure to install and operate pressure
washer in accordance with instructions provided in the owner's manual(s) supplied with product.
D. Pre-delivery service, i.e. assembly, oil or lubricants and adjustment.
E. Items or service normally required to maintain the pressure washer.
F. Gasoline engine and components are expressly excluded from coverage under this limited warranty. Such components should
Pistola
be returned by the purchaser to the original manufacturer or to its authorized repair stations for service.
G. Additional items not covered under the warranty:
1. Normal wear items such as high pressure hoses, water and oil seals, o-rings, valves, lances and spray tips.
2. Motor brushes (Electric models only).
3. Cosmetic defects that do not interfere with functionality.
4. Rusted components.
5. Pump wear or valve damage caused by using improper oil, oil contamination or by failure to follow proper oil maintenance
guidelines.
7. RESPONSIBILITIES OF WARRANTOR UNDER THIS WARRANTY: Repair or replace, at Warrantor's option, pressure washer or compo-
nent which is defective, has malfunctioned and/or failed to conform within duration of the warranty period.
8. RESPONSIBILITIES OF PURCHASER UNDER THIS WARRANTY:
A. Provide dated proof of purchase and maintenance records.
B. Deliver or ship the Campbell Hausfeld pressure washer or component to nearest Campbell Hausfeld Authorized Service Center.
Freight costs, if any, must be borne by the purchaser.
C. Use reasonable care in the operation and maintenance of the pressure washer as described in the owner's manual(s).
9. WHEN WARRANTOR WILL PERFORM REPAIR OR REPLACEMENT UNDER THIS WARRANTY: Repair or replacement will be scheduled
and serviced according to the normal work flow at the servicing location, and depending on the availability of replacement parts.
This Limited Warranty applies in the U.S., Canada and Mexico only and gives you specific legal rights. You may also have other rights
which vary from state to state or country to country.
Low Pressure Operation
1. Push out on black nozzle to ensure lance is in low
pressure mode (Figure 13).
2. Twist nozzle cover to adjust
spray pattern from jet to wide
fan spray (Figure 14).
Figure 9
Figure 10
Figure 12
5
PW1520
Figure 13
Figure 14