Texas Instruments SimpleLink CC2640 User Manual page 21

device.
4. Press Reset button on the CC2650 LaunchPad and verify device is advertising, default device
name should be "SimpleBLEPeripheral"
5. OAD new version of simple_peripheral App image
a. Modify cc2650lp_app – FlashOnly_OAD_ExtFlash (for example, change fields in scan
response data (scanRspData[])) and build app and generate output hex file from IAR IDE
b. (Optional) Alternatively, the Python script can be used to generate metadata in the hex
file. See section 10.2 for details. BLE Device Monitor will generate the metadata
otherwise.
c. Connect using a device with HostTest project with BLE Device Monitor and load the
hex((($BLE_INSTALL$\examples\cc2650lp\simple_peripheral\iar\app\FlashOnly_OAD_E
xtFlash\Exe\simple_peripheral_cc2650lp_app.hex)
d. Press the Start button to begin downloading the image over the air