Precisionhd Camera 1080P12X - Cisco Precision 40 Manual

Telepresence precisionhd camera
Hide thumbs Also See for Precision 40:
Table of Contents

Advertisement

Cisco TelePresence PrecisionHD Camera
Contents
Introduction

PrecisionHD Camera 1080p12x

Part number: CTS-PHD-1080P12XG=
Spare PID: CTS-PHD-1080P12XS2=
HDMI and HD-SDI
HDMI is the main video source. The maximum resolution
is 1080p60.
HD-SDI* is the secondary video source. The maximum
resolution is 1080p30.
The HDMI and HD-SDI* can be used simultaneously. The
maximum resolution is 1080p30, if you want both to run
with the same resolution.
Camera control
Camera control is used for controlling the pan, tilt and zoom,
and for powering up the camera.
Power
When the camera is used with a Cisco codec, power is
supplied through the Camera control cable.
When the camera is used with non-Cisco codecs, you
may have to connect the power separately.
Extra camera
For multi-camera setup, e.g. when you connect cameras in a
daisy chain**:
The first camera in the chain is powered by the camera
control cable. The next must use the 12V DC Power in.
Use an extra camera cable between the Extra camera
sockets.
Ethernet
For software upgrades on daisy chained cameras. Requires
software version TC3.0 or higher on the Codec C series.
Kensington lock
The Kensington lock may be used to prevent the camera from
being moved from its place or to prevent theft.
* Not supported with Codec SX20, C20, C40 and C60.
** Not supported with Codec C20.
D14640.17 Cisco Telepresence PrecisionHD Camera Guide APRIL 2017
Physical Interface
Physical interface
Connecting the camera
Power supply
Extra camera out and
for daisy chaining**
6
Daisy chaining
Video output format
Camera control
HDMI Video
HD-SDI
and power
out
out*
The orange LED lit during a call.
The lens hood is detachable.
We recommend that you mount it to
prevent stray light from disturbing your
video experience. Snap it on gently.
The green LED is continuously lit when
power is On, but it flickers when receiving
signals from the remote control.
When mounted upside down on the
Profile 65" and the Profile 65" Dual, the
LED is not visible.
Camera guide
Appendices
Kensington lock
Ethernet
RJ45
Copyright © 2017 Cisco Systems, Inc. All rights reserved.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents