Code Search - GE RM24906 Instruction Manual

Code Search

If your device does not respond after you have
tried all the codes for your brand, or if your brand is
not listed, try searching for your code by following
these steps.
1. Manually turn on the device (
be controlled.
2. Press and hold the
button until the red indicator stays
on, then release the
button.
3. Press and quickly release the desired
device button (
indicator blinks off once.
4. Press the
(up to 300 times) until the device
to be controlled turns off. The red
indicator blinks off with each button
press.
5. Press and release
code.
Most users will store VCR codes under the VCR
button, Cable codes under CABLE, etc. If (for
example) you want to store a VCR code under
DVD/AUX, first follow the procedure for Direct
Code Entry (previous page) and press DVD/AUX
in step 2 of Direct Code Entry, then enter ANY VCR
code in step 3 of Direct Code Entry. Then follow
the steps above for Code Search.
Note: Code Search starts from the currently
stored 4 digit number under that mode. Sometimes
the first code that "works" with your device may
only allow limited functionality (e.g. the MENU
button might not work). There may be a code
that performs more functions. Continue the code
search process until the best code is found.
CODE SEARCH
,
TV VCR
button repeatedly
ON•OFF
ENTER
TV
CODE SEARCH
, etc.). The red
to install the
8
, , etc.) to
VCR