Table of Contents
Advertisement
7
Video Menu
VIDEO
8
Audio Menu
AUDIO
9
Features Menu
FEATURES
12 EN
This function is used to select the presetted picture
Picture Mode
settings. (Cinema/Sports/ V ivid / Hi-Bright/User)
Contrast
These settings are used to adjust the Contrast (0-100),
Brightness
Brightness (0-100), Saturation (0-100), Sharpness (0-10),
Saturation
and Hue (-30, +30) values for fine adjustments of the picture.
Sharpness
Hue
NOTE : Hue is enabled for NTSC channels only.
Colour
Use this option to select and change colour temperature
Temperature
(Normal, Warm, Cool)
This function is used to ON/OFF the blue back
Blue Back
DNR
Advance Picture
Color Improve
Adjust
Motion control
Flesh tone
Adaptive luma
control
This function is used to select the preset sound modes
Audio Mode
(Music , Standard, Speech, User)
The Equalizer 100Hz, 300Hz, 1KHz, 3KHz, 10KHz, (-10 - +10) can
Equalizer
be changed by the user
The main speaker volume can be adjusted by varying this
Volume
volume bar (0-100)
User can select the left/right speaker intensity by changing
Balance
balance (-50 - +50)
Make this option On to enable the Surround Sound effect
SRS True bass
of TV. Audio mode and Equalizer is inactive when this
is ON. SOUND key will be disabled when SRS
true bass is ON. (This feature is optional)
This function is used to for automatic adjustment of volume
AVL
level(On/Off)
Speaker
The main speaker can be made On/Off by this option
The AV out volume can be controlled by selecting AV out
AV Out
fixed or variable. (0-100)
The backlight value can be varied (0-10) This function is used to
Back Light
adjust brightness level of panel
TV is in Normal state when this is off, to save the power consumed
by TV select
Energy Saving
Mid/ Power Saving High,
audio is On and Picture is off. Press any key to exit audio only mode
except VOL+/- and Mute.
The DNR (Low / High / Off) reduce the noice
by applying temporal and spatial noise reduction
filters to the video data.
The Color improve (On/Off) adjust the color
parameter of picture contents.
This function is used to control the jitter (On/Off) in
motion pictures (Not active in
These functions improve flesh tone (On/Off) and the
adaptive luminance of the picture (On/Off).
power saving modes Power Saving
Only Mode, in Audio Only mode only
Audio
YPbPr, HDMI)
low/Power Saving
Advertisement
Table of Contents
