Philips 32PF9630A/37 User Manual page 7

CABLE
HDMI 1 HDMI 2
TO TV
2
OUTPUT
IN OUT
3
STB / SAT
CABLE
HDMI 1 HDMI 2 CABLE / ANTENNA
75
1
2
SIGNAL
SPLITTER
3
IN OUT
STB / SAT
Watching Cable TV programs that don't
require the cable box
Since you've connected the cable TV signal
directly to the TV's tuner, you can also watch the
unscrambled programs by simply tuning to the
desired channel.You must first use Autoprogram,
however, to store channels in the TV's memory.
See page 10.
Note: This connection will supply stereo sound to the
TV if it is being broadcast by the station you are
watching.
&
Basic connections to the TV
Your integrated digital TV automatically decodes and displays the four basic
DTV picture resolution standards.
- SDTV (Standard Definition TV) are broadcast as 480i (480-line interlaced)
or 480p (480-line progressive scan) video.
- HDTV (High-Definition TV) are broadcast either in the 1080i or 720p
formats, always with a widescreen picture.
Note: Progressive scan video (p) is more like that you see in a movie theater.
Images are much more distinct and free of flicker, and motion is smoother.
Next to analog NTSC broadcast reception, your TV has an integrated High
Definition TV tuner which receives, decodes and displays terrestrial ATSC
and unscrambled cable (QAM) signals.
CABLE
HDTV quality is only reproduced when a broadcaster or cable provider
broadcasts HDTV signals.
Note: Ask your broadcaster or cable box provider to transmit/enable HD content
to your home, and possibly upgrade to a CableCard for the decription of HD
signals.
CABLE / ANTENNA
There are 2 ways to get HDTV content: via cable or via antenna.
Note: This drawing is used wherever you can connect cable or antenna.
75
- Cable TV
Connect the cable TV signal to the
the bottom of the TV. See page 10 for details on using Autoprogram to
store channels in the TV's memory.
Note: this connection will supply stereo sound to the TV if it is being broadcast by
the station you are watching.
CABLE / ANTENNA
- Cable box with
• Connect the incoming cable TV signal to the cable
75
• Connect a coaxial cable (not supplied) from the
• Set the
Note: This connection will not supply stereo sound to the TV. The reason is that
Pr
the RF output on a cable box - labeled
Pb
will not send a stereo signal to the tuner (VHF/UHF) input on a TV.
- Cable box with A/V outputs
• Connect the incoming cable TV signal 1 to a signal splitter (not
4
• Connect a coaxial cable (not supplied) to a connector on the signal
• Connect another coaxial cable (not supplied) to a connector on the
• Connect A/V cables (not supplied) to the
• To view programs from your cable box, first press the
• Press the cursor down or up buttons until the
• Press the
RF IN/OUT
back of the cable box.
back of the cable box to the
CABLE/ANTENNA 75 Ω
the bottom of the TV.
Note:Your cable box may have a different label for the
or .
OUTPUT OUT
switch 3 of the cable box to
OUTPUT CH
(whichever is correct for your cable box), then tune the TV to the
corresponding channel.
Once tuned, change channels at the cable box, not the TV.
supplied).The signal splitter enables you to avoid having to use the TO
TV jack on the back of the cable box.This jack will not supply stereo
sound to the TV.
Note:Your cable box may have a different label for the
or .
OUTPUT OUT
splitter and to the
CABLE/ANTENNA 75 Ω
signal splitter and to the cable
box.
outputs on the back of the cable box and to the
) and (labeled
VIDEO AUDIO L
the back of the TV, see p. 28.
the remote control.
selected.
button to confirm your selection.The
OK
becomes current for the viewing of cable TV programs through your
cable box.
Note: If your cable box Audio/Video outputs will not supply video and stereo
audio to the TV, you will need to make the connection shown above in the
example "Cable box with
RF IN/OUT
x jack at
CABLE/ANTENNA 75 Ω
jack 1 on the
IN
jack on the
TO TV
x jack 2 at
jack, such as
TO TV
or
CH 3
, or for example -
TO TV OUT OUTPUT
jack, such as
TO TV
x jack 2 on the TV.
jack 3 on the back of the cable
IN
and
VIDEO AUDIO L
video (labeled
AV2
) jacks 4 behind the door on
and
R
button on
AV+
signal source is
AV2
input source
AV2
".
4
and
R
3