Switching The Tv On For The Fi Rst Time; Going Back To The Installation Menu - Philips 3139 User Manual

Switching the TV on for the first time
When you turn the TV on for the first time,
the TV is in digital mode and the following
menu appears on screen.
Setup
Language
Country
Time Zone
Service Scan
Select your preferred language
Selecting your language, country and
time zone
Press the Æ key to enter Language,
1.
and press the Î or ï key to select your
preferred language.
u
2. Press the key to confirm your
selection.
Press the Î or ï key to highlight
3.
Country or Time Zone, and press
the Æ key to enter Country or Time
Zone.
Note: If you select the wrong country,
the channel numbering will not conform
to the standard for your country. You
might receive fewer or no services.
Press the Î or ï key to select your
4.
preferred Country or Time Zone.
u
5. Press the key to confirm your
selection.
Press the ï key to select Service Scan.
6.
u
7. Press the key to start the installation.
The TV searches for the available
analogue and digital channels.
8. If no digital channels are detected, press
key to switch to analogue mode.
11:28
English
Español
Français
Italiano
Magyar
Going back to the Installation
menu
This procedure resets both the digital and
analogue modes to the factory default
settings.
1. On the side controls of the TV set, press
and hold down the MENU key for 5
seconds. A menu appears on the screen.
2. Select your language, country and time
zone as if this is the fi rst time you have
turned on the TV.
9