Replacing the sensor board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Align the sensor board on the display-back cover and snap the sensor board into
place.
2
Slide the sensor-board cable into the slot on the sensor board and press down
the latch to secure the cable.
Post-requisites
1
Replace the
display
2
Replace the
display
3
Replace the
wireless
4
Replace the battery.
5
Replace the
base
computer. After working inside your computer, follow
After working inside your
panel.
assembly.
card.
cover.
computer. For more safety best
www.dell.com/
Before
81