Miele G 7804 Installations Plan page 8

Cold water or hot Max. temperature
water Max. water hardness
Min. flow pressure
Max. pressure
Flow rate
On-site threaded union
Connection hose length (supplied)
Machine is DVGW certified. Direct connection to mains water
supply without special safety stopcock permitted.
Water connection Australia:
To prevent back-syphonage, the water connection must be
via an approved Dual-Check-Valve supplied with the
machine.
Demineralised Standard version:
water
Variant with demineralised water pump (aqua destillata
pump) (ADP):
On-site threaded union
Connection hose length (supplied)
Water connection Australia:
To prevent back-syphonage, the water connection must be
via an approved Dual-Check-Valve supplied with the
machine.
Drain water Drain hose (inner dia. × thickness × l)
Max. drain pump head height from bottom edge of machine
Max. brief flow rate per hose
Hose connector on site for drain hose (outer dia. × l)
External Connection for one of each of dispensers DOS G 20 and
dispenser DOS G 60 on rear panel
(optional)
Machine data Height including lid
Height without lid
Width
Depth
Net weight
Floor load in operation
Min. installation location access width including transport
pallet
Min. installation location access height including transport
pallet
When using plinths (UM 30-60 and/or UE 30-60) these must be secured to the floor. It is essential to fasten the machine to
the plinth.
The electrical, water, drain and exhaust connections must be made in accordance with all appropriate local and national
safety regulations and applicable standards.
During installation it is essential to follow the installation instructions provided! Modification rights reserved! Dimensions in
mm.
Installationsplan G 7804
Stand: 01.06.2003
Min. flow pressure
Min. flow pressure with extended water intake
Max. pressure
Flow rate
Min. flow pressure
Max. pressure
°C 70
°dH 60
kPa 250
kPa 1000
l/min 8
inch ¾ male thread
(USA: 11.5 NH)
mm 1500
kPa 250
kPa 100
kPa 1000
l/min 8
kPa 5
kPa 30
inch ¾ male thread
(USA: 11.5 NH)
mm 1500
mm 22 × 6 × 1500
m 1.0
l/min 50
mm 22 × 30
mm 850
mm 820
mm 598
mm 600
kg 70
N 1500
mm 700
mm 950
Seite 6