Sony HT-RT4 Operating Instructions Manual page 11

1
Prepare screws (not supplied) that
are suitable for the holes at the
rear of the Bar Speaker or
Surround Speakers.
More than 30 mm
5 mm
9.5 mm
Hole at the rear of the speakers
2
Fasten the screws in the wall.
The screw should protrude as
illustration.
For the Bar Speaker
6 mm to
7 mm
For the Surround Speakers
8 mm to
10 mm
3
4 mm
600 mm
369.5 mm
Hang the Bar Speaker or Surround
Speakers on the screws.
Align the holes at the rear of the
speakers with the screws.
For the Bar Speaker
Hang the Bar Speaker on the two
screws.
For the Surround Speakers
Hang the Surround Speaker on the
two screws.
11
GB