Message
Appears if there is a problem with the Auto high-beam.
●
Appears if the temperature inside the camera is too
●
high and either the auto high beams are in operation or
the headlight switch is turned to AUTO.
Appears when the area around the camera is blocked
●
by dirt, mud, etc. Stop your vehicle in a safe place, and
wipe it off with a soft cloth.
May appear when driving in bad weather (rain, snow,
●
fog, etc.)
Appears after the 12-volt battery charging system
●
indicator comes on.
Appears if there is a problem with the acoustic vehicle
●
alerting system.
uuIndicatorsuMulti-Information Display (MID) Warning and Information Messages
Condition
Explanation
Manually operate the headlight switch.
●
If you are driving with the high-beam headlights when
●
this happens, the headlights are changed to low beams.
Use the climate control system to cool down the
●
camera.
Goes off - The camera has cooled down. To resume
●
the system, turn the headlight switch to AUTO.
2 Front Sensor Camera P. 257
Have your vehicle checked by a dealer if the message
●
comes back on after you have cleaned the area around
the camera.
Your vehicle has less ability to accelerate and may be
●
harder to start on an incline.
Contact a dealer immediately.
●
Have your vehicle checked by a dealer immediately.
●
Continued
109