Table of Contents
Advertisement
L05 User's Manual
SOUND MODE
Select either STEREO or MONO (monaural) sound modes.
Note: STEREO has no effect if the current audio signal is monaural. When SOUND
MODE is changed, an on-screen display will appear, indicating the actual audio status
(MONO or STEREO)
AVL
Disable or enable the Automatic Volume Leveling feature, which minimizes variations in
audio playback level.
BALANCE
Adjust the respective audio playback setting.
TREBLE
Adjust the respective audio playback setting.
BASS
Adjust the respective audio playback setting.
INCREDIBLE STEREO
When INCREDIBLE STEREO is set to YES, and the current SOUND MODE is MONO,
a signal processing technique is applied for the purpose of simulating a "stereo- like"
effect.
Note: When INCREDIBLE STEREO is set to YES, and the current SOUND MODE is
STEREO (regardless of whether there is a stereo signal on the current channel) the
resultant effect will be imperceptible, minimal or possibly degraded, depending upon
various factors.
ULTRA BASS
When ULTRA BASS is set to YES, the audio frequency equalization is modified such
that the bass frequencies are significantly emphasized.
VOLUME BAR
When VOLUME BAR is set to YES, an OSD graphic appears that provides visual
verification ( e.g. "||||||----- 15") during volume adjustment, by means of either the remote
control, or the front panel (if it is not locked out).
MIN VOLUME
Specify the lowest volume setting possible by means of either the remote control, or the
front panel (if it is not locked out). This setting cannot exceed MAX VOLUME (see
MAX VOLUME)
Note: The MIN VOLUME setting is effective whether the volume command is issued
from the front panel (if it is not locked out), a standard guest- mode remote control, or an
RC2573GR setup remote in setup mode.
17
091105.1833
(MONO / STEREO)
(OFF / ON)
(||||||||||||| -31 - 31)
(||||||||||||| 0 – 100)
(||||||||||||| 0 – 100)
(NO / YES)
(NO/ YES)
(NO / YES)
(||||||||||||| 0 - 100)
Advertisement
Table of Contents
