Program Sort; Manual Store; Other Settings In The Install Menu - Philips 23iF9946 User Manual

Program sort

h
& Press key
.The TV Menu is displayed on
the screen.
TV Menu
Picture
Sound
Language Æ
Features
Country Æ
Install
Mode
Auto Store Æ
Manual Store Æ
Sort Æ •
Name Æ

Manual store

This menu is used to store the programmes
one at a time.
h
& Press the
key.
é With the cursor, select the Install menu then
Manual store:
TV Menu
Manual Store
Picture
Sound
Features
Install
Mode
Program No.
Fine Tune
" System: select
Europe
or (BG standard), Eastern
Western Europe
Europe (DK standard), United Kingdom (I
standard) or France (LL' standard).
* Except for France (LL' standard), you must select

Other settings in the Install menu

h
& Press the
key and select the Install menu:
é Language: to change the display language for
the menus.
" Country: to select your country (GB for
Great Britain).
This setting is used for the search, automatic
programme sort and teletext display. If your country
does not appear in the list, select ". . . "
' Auto Store: to start automatic search for all
programmes available in your region. If the
transmitter or cable network sends the
automatic sort signal, the programmes will be
numbered correctly. If this is not the case, you
need to use the Sort menu to renumber the
programmes (see p. 4).
Some transmitters or cable networks broadcast
Install
0
•
1
•
2
•
3
•
4
5
•
System Europe
Search
Store
(automatic detection*)
é With the cursor, select the Install menu
followed by the Sort menu.
" Select the programme you want to move using
the cursor
UP/DOWN
' Then use the cursor
new number and validate with cursor
( Repeat steps " and ' for each program you
wish to renumber.
§ To quit the menus, press
choice France.
' Search: press cursor
Once a programme is found, the scanning stops
and its name is displayed (when available). Go
to the next step. If you know the frequency of
the required programme, this can be entered
ñ
directly using the
If no picture is found, consult the possible solutions (p. 12).
( Program No.: enter the required number
with the cursor LEFT/
keys.
§ Fine Tune: if the reception is not satisfactory,
adjust using the cursor LEFT/
è Store: press cursor
stored.
! Repeat steps ' to ! for each programme to
store.
ç To quit the menus, press
their own sort parameters (region, language, etc.). In
this case, indicate your choice using the cursor
UP/DOWN and validate with cursor RIGHT.To quit
or interrupt the search, press
found, consult the possible solutions (p. 12).
( Name : If required, you can give a name to the
programmes and external connectors. Use the
cursor LEFT/ to move around the name
RIGHT
display area (5 characters) and the cursor
to select the characters.When the
UP/DOWN
name has been entered, use the cursor
exit.The name is stored.
Note: on installation, the programs are named
automatically when an identification signal is sent.
§ To quit the menus, press
and press cursor
RIGHT
to select the
UP/DOWN
.
LEFT
∂
.
.The search starts.
RIGHT
ô
to keys.
ñ ô
or to
RIGHT
.
RIGHT
.The program is
RIGHT
∂
.
h
. If no picture is
to
LEFT
∂
.
5
.