Table of Contents
Advertisement
continuously. If you experience a loss of signal
or audio, reposition the antenna inside the
home or outside as necessary.
3. Installing the Shuttle on the Cradle
Install the shuttle as follows:
a. Carefully line up the shuttle rear spine grooves
with the cradle guide spines; slide the latch tab
LATCH TAB
LOCK/UNLOCK
LEVER
SHUTTLE
LATCHING
TAB
CRADLE
FRONT VIEW
CRADLE GUIDE SPINES
lever to the unlock (
shuttle into the cradle.
b. After making sure the connectors are properly
lined up, gently press down on the shuttle to
mate the connectors together.
c. Slide the latch tab lever to the lock (
the tab will enter the shuttle latching tab recess
to prevent vertical movement. The shuttle
should now be nestled securely in the cradle.
CRADLE
TOP VIEW
SHUTTLE
REAR VIEW
20-PIN
SYSTEM
CONNECTOR
CONNECTOR
GUIDE PIN
CRADLE
REAR
VIEW
-7-
) position, and lower the
) position;
SHUTTLE
REAR SPINE
GROOVES
SHUTTLE
LATCHING
TAB RECESS
LATCH TAB
LOCK/UNLOCK
LEVER
ANT RF
CONNECTOR
128-7195
7 of 12
Advertisement
Table of Contents
