Advertisement
Alignment and Adjustments
1-8 LED Operation
(
:On,
TIMER
1-9 61" Option
LED Indicators
* The 61" model has no additional Enter button, and the Source button provides an Enter
function as well. That is, the Source button is for Entering with at status with the OSD menu,
while it is also for the Source Selection at status without OSD menu.
1-10 Lamp Time Clear
* Existing lamp time should be cleared after replacing lamp.
1) Select Option Table.
2) Run item lamp time clear(24) on the 2nd page of option table.
1-11 Display spots
1) Appearance: Some areas, lines, or points with black, cyan, yellow, magenta, etc, that is not white color
are found in the white (10~100%) picture among repose pictures, and in some cases, red, green, blue color
of area is appeared at black picture.
1-6
:Blinking, : off )
LAMP
STAND BY/TEMP
Standby mode.
A timer pilot light when Timer Auto On or is selected.
Normal operation
Normal operation(When Timer Auto On or off is selected.)
Lamp is warming up. The normal picture comes on after 25 seconds.
The normal picture comes on after 25 seconds.(when Timer Auto On or
off is seleted.
Air vent cover in the rear of the TV is not properly installed.
Inside temperature of the TV is over normal. Clean the air vent cover in
the rear of the TV. Turn the TV back on after 1hour.
The lamp does not work, please contact an authorized service center for
assistance.
SP43L2/50L2HX
Indication
SP61L2HX
a
b
a
b
c
c
d
d
f
e
(a) Input Source Selection
(b) Menu Display
(c) Channel Selection
(d) Volume Adjustment
(e) Confirm your choice
(Store or Enter)
f
(f) Power On/Off
e
Samsung Electronics
Advertisement
