GE Multilin D400 Instruction Manual page 153

CHAPTER 12: USING THE D400 LOCAL CONFIGURATION UTILITY
D400 SUBSTATION GATEWAY INSTRUCTION MANUAL
Table 46: Sync Set Example 3
Field
Sync Set ID
Destination IP Address
Destination User Name
Source Path Name
Destination Path Name
Check and rsync Interval
Forced rsync Interval
The Sync Manager only copies files to the remote device. Files are not deleted from the
remote device if they are deleted from the D400 after synchronization. Instead, they are
recreated during the next sync operation.
A forced rsync is performed upon each startup of your D400 device.
The D400 Designation Place holder %D400_DESIGNATION is only to be used with
redundant D400s.
Value
3
192.1681.3
admin
/mnt/datalog/arrm
/cygdrive/c/Stations_Data/GW/[Station_1,Station_2,Station_3]/
D400_Name_1%D400_DESIGNATION
Where, %D400_DESIGNATION is the place holder for the D400
Designation i.e. _ A or _B.
For the above example, the destination path is:
For D400A:
/cygdrive/c/Stations_Data/GW/[Station_1,Station_2,Station_3]/
D400_Name_1 _A
For D400B:
/cygdrive/c/Stations_Data/GW/[Station_1,Station_2,Station_3]/
D400_Name_1 _B
60
60
GE INFORMATION 153