Technical Information; Fcc Information - Audiovox XM CNP-1000C Quick Start Manual

Audiovox satellite radio quick start guide

Hide thumbs

page of 2

/ 2
Bookmarks

Getting Started: 3 Easy Steps!

Step 1: Setting Up Your XM Ready System

The XM Connect and Play is the only component you need

to get XM through your XM Ready audio system. With

power to your XM Ready audio system turned OFF, simply

connect the end of the antenna cable to the port on the

back panel of your XM Ready audio system labeled "XM."

Step 2: Acquiring XM Signal

Turn on the power to your XM Ready audio system. Choose

XM as the input source per instructions in your XM Ready

audio system's user manual. Tune to Channel 1, the XM

Preview Channel.

Move your antenna to various window locations around

your home to see where the best reception will be

received. Most XM customers place the antenna in a

south-facing window with a clear view to the sky. There are

two ways to confirm that you have strong signal reception:

Note: The optional CNP-HEXT Connect and Play extension cable

is available for installations requiring additional cable length.

1. Signal strength meter: Some XM Ready systems display

a signal strength meter for determining signal strength.

Refer to your XM Ready audio system's user manual for

more information. Otherwise, use the Preview Channel

to determine if you are receiving the signal.

2. Hear XM Preview Channel: If you are tuned to Channel 1

and hear the audio, you are receiving satisfactory signal

strength to receive the XM service. If you do not hear

any audio, it means your antenna is not receiving an

adequate satellite or terrestrial repeater signal and must

be moved to a more appropriate location.

Once you can hear the Channel 1 broadcast clearly and consistently,

you are ready to activate your service

Warranty

AUDIOVOX ELECTRONICS CORPORATION (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof,

under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such defect(s) will be

repaired or replaced with new or reconditioned product (at the Company's option) without charge for parts and repair labor.

To obtain repair or replacement within the terms of this Warranty, the product is to be delivered with proof of warranty coverage (e.g., dated bill of sale),

specification of defect(s), transportation prepaid, to an approved warranty station or the Company at the address shown below. This Warranty does not extend

to the elimination of externally generated static or noise, to costs incurred for installation, removal, or reinstallation of the product, damage to speakers,

accessories, or vehicle and home electrical systems, or malfunction of satellite transmissions, repeater signal, or receiver unit.

This Warranty does not apply to any product or part thereof which, in the opinion of the Company, has suffered or been damaged through alteration, improper

installation, mishandling, misuse, neglect, accident, or by removal or defacement of the factory serial number/bar code label(s). THE EXTENT OF THE

COMPANY'S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE

COMPANY'S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT.

This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANT-

ABILITY, SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY HEREUNDER INCLUD-

ING ANY IMPLIED WARRANTY OF MERCHANTABILITY MUST BE BROUGHT WITHIN A PERIOD OF 48 MONTHS FROM DATE OF ORIGINAL PURCHASE.

IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER

WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. No person or representative is authorized to assume for the Company any liability other than expressed

herein in connection with the sale of this product.

Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage so the above

limitations or exclusions may not apply to you. This Warranty gives you specific legal rights and you may also have other rights which vary from state to state.

U.S.A.: AUDIOVOX ELECTRONICS CORPORATION, 150 MARCUS BLVD., HAUPPAUGE, NEW YORK 11788, 1-800-645-4994

CANADA: CALL 1-800-645-4994 FOR LOCATION OF WARRANTY STATION SERVING YOUR AREA.

Technical Information

Height: 29.2 mm (1.15 inches), Width: 77.0 mm (3.03 inches), Depth: 91.3 mm (3.60 inches), Weight: 10 oz (310 g), Power: 2.2 W

FCC Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference,

and 2. This device must accept any interference received, including interference that may cause undesired operation.

IMPORTANT: THE FCC AND FAA HAVE NOT CERTIFIED THE XM CONNECT AND PLAY FOR USE IN ANY AIRCRAFT (NEITHER PORTABLE NOR PERMA-

NENT INSTALLATION). THEREFORE, XM CANNOT SUPPORT THIS TYPE OF APPLICATION OR INSTALLATION.

Printed on Recycled Paper

Step 3: Activating Your Service

A one-time activation fee is required to establish an account and

activate service with XM Satellite Radio. Applicable activation

charges will be added to your first bill.

1. Before activating XM service, make sure your XM equip-

ment is tuned to the XM Preview Channel (Channel 1).

2. Determine your eight-character XM Satellite Radio ID

number by referencing the label on your XM Connect and