Table of Contents
Advertisement
Mouse Port Switching
Mouse Port Switching allows you to use the mouse wheel button (clicking it twice) to
switch between ports. Mouse Emulation (above) must be enabled in order for Mouse Port
Switching to work. To toggle between mouse port switching enabled and disabled:
1.
Invoke HSM
2.
Press [W]
This procedure is a toggle. Repeat Step 1 and 2 to disable Mouse Port Switching
Note: This feature is only supported by 3-key USB scroll wheel mice. The default setting is
OFF. This feature is only supported when mouse emulation is also enabled.
Power on Detection
With Power on Detection, if the focus computer is powered OFF, the GCS1902/1904 will
automatically switch to the next powered ON computer. Power on Detection can be enabled
or disabled. The default setting is enabled. To disable Power on Detection:
1.
Invoke HSM
2.
Press and release [E]
This setting is a toggle. Repeat Step 1 and 2 to disable Power on Detection
Keyboard Operating Platform
GCS1902/1904 default port configuration is for PC compatible keyboard operating platform.
If your console uses a PC compatible keyboard and you have a Mac or Sun computer
attached to GCS1902/1904, you can change the port's Keyboard Operating Platform
configuration so that the PC compatible keyboard emulates Mac keyboard, by:
1.
Bring the KVM focus to the port you want to set
2.
Invoke HSM
3.
Press and release the appropriate Function keys listed on table below
Key
Function
[F1]
To set the keyboard/mouse to use SPC mode so that it can work under
special operating systems as a standard (104 keys) keyboard/mouse
[F2]
Enables Mac keyboard emulation, see Mac Keyboard Emulation.
[F10]
Disables keyboard emulation. Key presses are passed straight through.
You're your console uses a Mac keyboard to access a Mac attached to a port,
for example. Automatically detects and sets the keyboard operating platform.
4.
You will automatically exit HSM once this procedure is completed
19
Advertisement
Table of Contents
