Applications; Example Of Applications - Siemens 7XV5653-0BA00 Operating Instructions Manual

s
1.2

Applications

1.2.1

Example of applications

With the help of the binary signal transducer 2 binary signals can be
detected and directly transmitted over FO distances up to 3 km via
multimode cables and can be put out in the remote station via relay
contacts. A repeater 7XV5461 is available for transmission with mono-
mode fibres up to 100 km (fig. 2a).
Transmission can, however, also be carried out via modem or PCM
devices (fig. 2b) after connecting the equipment to the RS232 interface.
L2 402,1A Max450.1A L2 402,1A Max450.1A
L3 402,1A Max450.1A L3 402,1A Max450.1A
BE1 K1 BE2 K2
Binary signal
transformer
RS232 FO
Multimode fibre up to 4 km
FO 820
Repeater
FO 1300
Monomode fibre up to 100 km
Fig. 1a: Example of application for direct fibre connections with
multimode or single mode fibre.
Page 14 of 40 2-channel Binary Signal Transducer
s
BE1
L2 402,1A Max450.1A L2 402,1A Max450.1A
L3 402,1A Max450.1A L3 402,1A Max450.1A
BE1 K1 BE2 K2
Binary signal
Binary signal
transformer
transformer
FO RS232
FO 820
Repeater
Fig. 1b: Example of application for a serial connection via modem
FO 1300
or a comms-device.
A 01/13 A 01/13
L2 402,1A Max450.1A L2 402,1A Max450.1A
L3 402,1A Max450.1A L3 402,1A Max450.1A
K1 BE2 K2
Binary signal
transformer
RS232 FO
Modem
or
PCM-device
communication networks
or 2 pilot pairs
2-channel Binary Signal Transducer
L2 402,1A Max450.1A
L3 402,1A Max450.1A
BE1 K1 BE2
Binary signal
transformer
FO RS232
Modem
or
PCM-device
Digital
Page 15 of 40
L2 402,1A Max450.1A
L3 402,1A Max450.1A
K2