Main Monitor Screen - Siemens SISTORE AX9 250 User Manual

Configuration
8.8.2

Main Monitor screen

66
Siemens Building Technologies
Fire Safety & Security Products
You can adjust the transparency of the setup screens by highlighting
Transparency and using the Left and Right arrow buttons.
Highlighting OSD Margin... and pressing the
be displayed on the monitor. You can adjust the horizontal and vertical margins so
that text and icons will not be hidden beyond the edges of the monitor.
Fig. 68 OSD Margin screen
Fig. 69 Main Monitor screen
You can adjust the display dwell time for each camera displayed on the main
monitor.
Highlight the box beside Mode and press the
You can select between Full Sequence and Cameo Sequence.
Pressing the Sequence button causes the DVR to sequence cameras, and the
DVR can sequence cameras in two modes: "Full" and "Cameo". In the Full mode,
the DVR sequences through the cameras and displays them full screen. In the
Cameo mode, the bottom right window in a multi-screen format sequences through
the cameras.
NOTE
Any cameras that are Off, have lost video or are set to Covert (unless the user has authority to view
covert cameras) will be excluded from the Cameo sequence.
You can define the screen layout in a variety of formats and set the DVR to
sequence through the different screen layouts (pages) so that all the cameras will
be displayed. You can also set up the DVR to display one camera or a group of
cameras all the time while cycling through the remaining cameras in a "cameo"
window. This can be done with one camera displayed full screen while displaying
the cameo window as a PIP (picture in picture), or displaying the cameras in a grid
pattern with the bottom right window as the cameo.
button displays how OSD text will
button.
03.2007