ASSEMBLY INSTRUCTIONS canopy 2. Insert the bolt & nuts into bracket B and tighten it as shown on the photo. 1. Insert the tube A into the plastic bracket B. 3. Fit the canopy by inserting into plastic holder on the parental handle as shown on the photo.
IMPORTANT! KEEP FOR FUTURE REFERENCE! READ CAREFULLY! USING GUIDELINE MAINTENANCE & CARE 1. Please check that whether the fixed parts are fixed tightly, flexible or not. And often add some lubricant oil to the turning parts in order to extend the usage lifetime. Please check whether the charger, battery, wires, plug, and other parted damaged or not, if find any parts damaged.