Disassembly And Assembly Instructions; Remove The Ac Inlet; Remove The P-Board; Remove The Tuner Unit - Panasonic TX-PF42G30 Service Manual

8 Disassembly and Assembly Instructions

8.1.

Remove the Rear cover

1. See PCB Layout (Section 3)
8.2.

Remove the AC inlet

Caution:
To remove P.C.B. wait 1 minute after power was off for dis-
charge from electrolysis capacitors.
1. Unlock the cable clampers to free the cable.
2. Disconnect the connector (P9).
3. Remove the screws (×2
8.3.

Remove the P-Board

Caution:
To remove P.C.B. wait 1 minute after power was off for dis-
charge from electrolysis capacitors.
1. Unlock the cable clampers to free the cable
2. Disconnect the connectors (P2, P6, P9, P11, P34 and
P35).
3. Remove the screws (×7
) and remove the AC inlet.
) and remove the P-Board.
8.4. Remove
cover
1. Remove the screws (×2

2. Remove the Side terminal cover.

8.5.

Remove the Tuner unit

1. Remove the Side terminal cover. (See section 8.4.)
2. Unlock the cable clampers to free the cable.
3. Disconnect the connectors (A1, A6, A8, A11 and A35).
4. Disconnect the flexible cables (A20, A31 and A32).
5. Remove the screws (×3
21
the Side terminal
).
) and remove the Tuner unit.