Brushing Routines; Features; Easy-Start®; Deactivating Or Activating The Easy-Start Feature - Philips FlexCare HX6910 User Manual

Rechargeable sonic toothbrush
Hide thumbs Also See for FlexCare HX6910:
Table of Contents

Advertisement

EngliSh
8
4235.020.2275.6.indd 8
Sensitive mode
Gentle, yet thorough cleaning for sensitive gums and teeth.
Massage mode
Gentle gum stimulation.

Brushing routines

go Care routine
1-minute brushing cycle in the Clean mode, for a quick clean. You hear the
Quadpacer signal at 15-second intervals.
Max Care routine
3-minute brushing cycle that combines the Clean and Massage modes in
one routine for a thorough mouth clean. There are 30 seconds of Clean
mode and 15 seconds of Massage mode for each of the 4 sections of your
mouth. You will hear the Quadpacer signal at 45 second intervals.
Note: When Sonicare is used in clinical studies, the default
2-minute Clean mode must be selected. The handle should be
fully charged. Deactivate the Easy-start feature and for areas
where excess staining occurs, an additional 30 seconds of
brushing time can be spent to assist with stain removal.

Features

Easy-start®
-
This Sonicare model comes with the Easy-start® feature activated.
-
The Easy-start feature gently increases power over the first 14
brushings to ease into the Sonicare experience.
Note: Each of the first 14 brushings must be at least 1 minute in length to
properly move through the Easy-start ramp-up cycle.

Deactivating or activating the Easy-start feature

1
Attach your brush head to the handle.
2
Place the handle in the plugged-in charger.
-
To deactivate Easy-start:
Press and hold the power button for 5 seconds. You hear 1 beep to
indicate that the Easy-start feature has been deactivated.
-
To activate Easy-start:
Press and hold the power button for 5 seconds. You hear 2 beeps to
indicate that the Easy-start feature has been activated.
Note: Using the Easy-start feature beyond the initial ramp-up period is not
recommended and reduces Sonicare's effectiveness in removing plaque.
Smartimer®
The Smartimer® indicates that your brushing cycle is complete by
automatically turning off the toothbrush at the end of the brushing cycle.
Dental professionals recommend brushing no less than 2 minutes twice a
day.
29-09-09 09:21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents