How To Shave With An Electric Razor; Trimming; Cleaning - Norelco Speed-XL 8170XLCC Manual

ENGLISH
18

How To Shave With An Electric Razor

◗ Use this razor for its intended household use
as described in this manual.
◗ Shaving with a clean, dry face gives the best
results.
C
Turn razor ON by pressing the on/off
1
button once.The blue light ring around the
button will light to indicate razor is on.
Shave against the direction of beard
growth using both straight and circular
movements.
◗ When you turn the razor on or off, all lights
will light up and then the remaining battery
capacity will be shown for a few seconds.
Stretch your skin with your free hand so
2
blades can lift and cut whiskers. Gently
press razor to skin so the floating heads can
follow the contours of your face.
DO NOT press too hard.Too much
pressure can pinch the skin into the combs.
Turn razor OFF by pressing the on/off
3
button once.The blue light ring around the
button will go out.
C
Put the protective razor head cap on the
4
razor to protect razor heads.
C
For optimal shaving results, replace razor heads
(model #HQ9) once a year or when the
replacement head indicator light starts blinking.

Trimming

To groom sideburns and moustache:
Turn razor ON.
1
C
Push down spring-release trimmer switch.
2
The trimmer can be activated while the razor is
running.
C
Hold trimmer as shown and move in
3
downward strokes with gentle pressure.
C
Close trimmer by pressing trimmer down.
4
Turn razor OFF.
5

Cleaning

◗ Regular cleaning guarantees better shaving
results.
◗ Always switch Razor OFF, unplug and remove
power cord before cleaning.
◗ Never clean, remove or replace head assembly
while motor is on.
◗ Do not apply pressure to combs. Do not
touch razor heads with hard objects as this
may dent or damage precision-made slotted
combs.
◗ Do not use razor if combs are damaged or
broken. Facial injury may occur.
ENGLISH
19