Preliminary Check; Tool List; Parts/Units That Should Not Be Disassembled - Epson AcuLaser C9200N Service Manual

EPSON AcuLaser C9200N

4.1 Preliminary Check

4.1.1 Tool List

The tools listed below are required for disassembling the printer.
Tool Name
Phillips screwdriver No.2
Long-nose pliers
Tweezers
DISASSEMBLY AND ASSEMBLY
Downloaded from www.Manualslib.com
Code Usage
For disassembling all of
1080532
the parts/units
1080564 Use as required
1080561 Use as required
manuals search engine

4.1.2 Parts/Units that Should Not be Disassembled

Do not disassemble the following parts or units. Doing so can result in malfunction of
the printer.
Consumables / After Service Parts
Do not disassemble the consumables or parts/units that are supplied as After
Reference
Service Parts.
---
Example:
---
Toner Cartridge
---
Fusing Unit
PH Unit
Parts/Units that are not described in this manual
Do not disassemble any parts/units that are not described in this manual.
Especially, the main frame must be kept unchanged from its original state because
the frame position has been strictly adjusted at the factory. Never loosen or remove
the screws securing the frame.
Preliminary Check
Revision D
157
Confidential