Pairing Your Headset - HTC BH M200 User Manual

Switching off
Press and hold the MFB for 3 seconds until the Red LED comes on (it will then
stay on for 3 seconds).
NOTE: You can also switch the headset off during a call by holding the
MFB for 6 seconds. The call will be transferred to your mobile phone.

Pairing your Headset

Your BH M200 Bluetooth headset needs to be paired to your compatible
Bluetooth-enabled mobile phone before it can be used. Note that different
Bluetooth devices use a different method to go through the pairing process.
1. Make sure your headset is turned off, then press and hold the MFB for 6 sec-
onds until the LED flashes Blue and Red quickly, which indicates that the
headset is in pairing mode.
2. Set your mobile phone to search for Bluetooth devices. The phone should
indicate it has found the "HTC BH M200" headset. Confirm that you want to
pair your phone and headset together. If you are unsure how to go through
the pairing process on your mobile phone, please refer to its user guide for
details.
3. When asked for a passkey, enter: "0000" (four zeros). Your device will confirm
that pairing has been successful.
NOTE: If your headset is not successfully paired within 2 minutes, the Blue
LED starts to flash slowly. In case of unsuccessful pairing, repeat steps 1 to
3.
8