Table of Contents
Advertisement
9) SATA0_1 (SATA 6Gb/s Connectors)
The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and
1.5Gb/s standard. Each SATA connector supports a single SATA device.
10) SATA_2_3/SATA_4_5 (SATA 3Gb/s Connectors)
The SATA connectors conform to SATA 3Gb/s standard and are compatible with SATA 1.5Gb/s standard.
Each SATA connector supports a single SATA device.
• A RAID 0 or RAID 1 configuration requires at least two hard drives. If more than two hard drives
are configured, the total number of hard drives must be an even number.
• A RAID 10 configuration requires four hard drives.
(Note) When a RAID configuration is built across the SATA 6Gb/s channels, the system performance of
the RAID configuration may vary depends on the devices are connected.
When SATA_DOM0/1 jumper
are set to 2-3 pin:
Pin No. Definition
7
1
7
1
SATA01
When SATA_DOM0/1 jumper
are set to 1-2 pin:
Pin No. Definition
7
1
7
1
SATA_4_5
Pin No. Definition
1
2
3
4
5
6
7
- 23 -
DEBUG
PORT
DEBUG
PORT
1
GND
2
TXP
3
TXN
4
GND
5
RXN
6
RXP
7
GND
DEBUG
PORT
1
GND
DEBUG
2
TXP
PORT
3
TXN
4
GND
5
RXN
6
RXP
7
P5V
7
1
7
1
SATA_2_3
GND
TXP
TXN
GND
RXN
RXP
GND
Hardware Installation
Advertisement
Table of Contents
