Mitsubishi F940GOT Handy Series Hardware Manual page 31

F940GOT Handy Series
2) Connect the external cable
Insert the external cable through hole "c)" of the Handy GOT main unit, and connect it to "e)"
and "d)".
3) Tighten the hexagon nut.
4) Pull lightly on the cable until excess cable is with dawn from inside the unit.
5) Securely tighten the hexagon nut for so that the cable will not come out and the waterproof
integrity is maintained.
Note:
As guideline, make sure that the clearance is 3.5 mm (0.14
W h e n p u s h i n g t h e c a b l e t h r o u g h ,
m a k e e a c h c o n n e c t o r f a c e d o w n w a r d s .
P a c k i n g
H e x a g o n n u t f o r
c a b l e m o u n t i n g
H e x a g o n n u t
f o r s e c u r i n g c a b l e .
2 2 m m ( 0 . 8 7 " )
P u l l i n g d i r e c t i o n
N o t e
Make sure to tighten the hexagon nut for cable
m o u n t i n g w i t h s u f fi c i e n t fo r c e t o avo i d
loosening.
As guideline, tighten it until the packing is
crushed by 0.5 mm (0.02
") or less.
Installation 3
) or more.
"
3-7