Ss/Gain Operation] - Panasonic DC-GH5 Owner's Manual

7. Recording Motion Pictures
Not available in these cases:
• This function is not available in the following cases:
– When [Photo Style] is set to [V-Log L]

[SS/Gain Operation]

You can switch the units of shutter speed values and gain (sensitivity) values.
[SEC/ISO] Displays the shutter speed in seconds and the gain in ISO.
Displays the shutter speed in degrees and the gain in ISO.
• Available degree values (When [Synchro Scan] is set to [OFF]):
[ANGLE/ISO]
11 d to 360 d
Displays the shutter speed in seconds and the gain in dB.
• Available gain (sensitivity) values:
AUTO or s6 dB to 30 dB (s12 dB to 30 dB when [Extended Gain Setting] is
set)
• 0 dB is equivalent to ISO 400.
[SEC/dB]
• The names of the menu items below change as follows:
– [ISO Sensitivity (video)] > [Gain Setting]
– [ISO Auto Lower Limit Setting] > [Auto Gain Lower Limit Setting]
– [ISO Auto Upper Limit Setting] > [Auto Gain Upper Limit Setting]
– [Extended ISO] > [Extended Gain Setting]
[WFM/Vector Scope]
You can display wave forms on the recording screen.
1
Select the menu.
>
MENU
[WAVE]
[VECTOR]
[OFF]
2
Press 3/4/2/1 to select the display position, and press [MENU/SET].
• Direct touch operation is also possible from the recording screen.
(P55)
[Creative Video] > [WFM/Vector Scope]
Displays waveforms as waves.
Displays waveforms as vectors.
s
185