Advertisement
1. VOLTAGE
2A. TO CHARGE
In North America, Central
1. Be certain your razor is
America, and South America,
OFF.
the most common voltage is
First time charging re-
between 110V and 130V AC.
quires a full 8 hours. For
When traveling to other coun-
first time or initial charge,
tries, common voltage may
Green Charge Indicator
range to 240V AC. Your new
Light will light to indicate
razor will automatically convert
razor is (re)charging. For
internally to work on 100V to
proper use, charge razor
240V AC systems.
for the full 8 hours as
An adaptor plug may be neces-
directed. A fully charged
sary for cord usage in foreign
razor will give approxi-
countries. It is suggested that
mately 2 weeks of 3
you take all adaptor plugs with
minute shaves per day.
you when traveling overseas to
2. Use only the cord provided.
ensure compatibility with most
3. Connect cord to razor and
foreign outlet configurations.
plug into outlet.
Norelco Travel Adaptor Plug
(Re)charge at tempera-
Kit, model TP5, may be pur-
tures between 40°F and
chased at a store near you or at
95°F. Charging at lower or
a Norelco Service Store.
higher temperatures ad-
versely affects lifetime of
batteries.
(Re)charging longer than
required period of time
will not harm razor.
However,
charging razor will reduce
life of batteries.
2B. TO RECHARGE
After initial 8 hour charge,
recharging will take only 1
hour to (re)charge batter-
ies to full capacity.
2C. FAST 5-MINUTE
QUICK CHARGE
When battery is totally
depleted, recharging for 5
minutes gives enough
energy for one 3-5 minute
cordless shave.
If razor has not been used
for at least a month, razor
must be recharged for a
full 8 hours (see Section
2A. TO CHARGE).
continuously
3. CORD/CORDLESS
SHAVING
Start with a clean, dry face.
7. Keep skin taut using your
You may choose to use a pre-
fingers to stretch skin so
shave lotion to set your beard
blades can cut whiskers
up for a close, smooth, com-
off.
fortable shave, especially if
8. Easy does it. Gently press
you are using an electric razor
razor to your skin so
for the first time.
floating heads can follow
CAUTION: It is recommended
the contours of your face.
that you wash and dry your
9. Turn razor OFF and un-
hands to remove any remain-
plug.
ing lotion before handling
It is not recommended
your razor. Some lotions may
that this razor be used
cause damage to the exterior
exclusively as a corded
finish of your razor housing.
razor. Continual use as a
In addition, clean razor heads
corded razor as well as
more frequently to prevent
continuously recharging
pre-shave lotion build-up.
razor will reduce life of
batteries.
A. CORD
NOTE: Razor does not re-
1. Be certain razor is in OFF
charge during shaving.
position.
2. Connect cord provided to
B. CORDLESS
razor.
1. Charge
3. Remove Protective Razor
directions.
Head Assembly Guard.
2. Slide ON/OFF switch ON.
4. Plug into 100V to 240V AC
Begin shaving.
outlet.
5. Slide ON/OFF switch ON.
Begin shaving.
Even when cord shaving,
if battery is low, wait a few
seconds for razor to go
ON.
6. Shave against direction of
beard growth using a quick,
small, circular motion.
4. POP-OUT SIDEBURN,
BEARD AND MOUS-
TACHE TRIMMER
1. Push Trimmer Slide Switch
up to pop out trimmer and
turn razor ON.
2. Hold trimmer, as shown,
to exact hairline desired.
Move trimmer downward
with gentle pressure (Fig. 1).
3. Turn razor OFF and brush
out trimmer section using
long bristles of brush.
4. Close trimmer by pushing
Trimmer Slide Switch down.
Lubricate trimmer teeth
twice a year with Norelco
Razor Lubricant, model
AL80, or one drop of light
machine oil.
according
to
1
Advertisement
