Hide thumbs Also See for N73:
Table of Contents

Advertisement

Record videos

1
To activate the camera, open the slide. If the camera is
in the
Image
mode, select
Video mode
toolbar.
2
Press the capture key to start recording. In the portrait
mode, use the scroll key for recording. The red record
icon
is shown and a tone sounds, indicating that
recording has started.
3
Select
Stop
to stop recording. The video clip is
automatically saved to the
Imgs. & video
Gallery. See 'Gallery', p. 26. The maximum length of the
video is 60 minutes (if enough memory available).
To pause recording at any time, press Pause. The pause
icon (
) blinks on the display. Video recording
automatically stops if recording is set to pause and there
are no keypresses within a minute. Press the capture key
again to resume recording.
To zoom in or out of the subject, press the zoom key on the
side of the device.
To make lighting and color adjustments before recording a
video, use the scroll key to scroll through the active
toolbar. See 'Setup settings—Adjust color and lighting',
p. 21 and 'Scenes', p. 21.
To free memory before recording a video, select
Go to free memory
images or video clips). See 'Free memory', p. 28.
from the active
Video capture indicators
The video viewfinder displays the following:
• The current capture mode indicator (1).
• The audio mute on indicator (2).
• The active toolbar (3), which you can scroll through
folder of
before recording to select the scene, white balance,
and color tone (the toolbar is not displayed during
recording).
• The total available video recording time (4). When you
are recording, the current video length indicator also
shows the elapsed time and time remaining.
• The device
memory (
) and
memory card
(
) indicators
(5) show where
videos are saved.
• The video quality
indicator (6)
indicates
whether the
quality of the video is High, Normal, or Sharing.
• The video clip file type (7).
Options
>
(only available if you have backed up
23

Advertisement

Table of Contents
loading

Table of Contents