Task 6: Install Transceivers and Connect Cables
Connect the network cables to their respective port interfaces:
•
Connect DAC cables to the SFP+/QSFP+ slots, or first install SFP+/QSFP+
transceivers and then connect fiber optic cabling to the transceiver ports.
•
For RJ-45 ports, connect using 100-ohm Category 5, 5e or better cable for
1000BASE-T connections.
As connections are made, check the port status LEDs to be sure the links are valid.
Go to
Chapter 5
for further details.
Figure 4-5. Making a Connection to an SFP+ Port
Chapter 4: Installing the Switch
4-9
SFP+
Transceiver
Fiber Optic
Cable