Save Image (Printing Location Not Fixed) - Brother HL-1050 Technical Reference Manual

3.6.5 Save image
(Printing location not fixed)
Command
ESC CR ! 12350F
Available Device
F
Description
After transferring the last print data into the image data area, this command saves the data with the ID which is
specified with the ESC & f # Y (Macro ID Configuration) command as a PCL command on the device.
The printing location for the saved data is not fixed on the page.
The move cursor command allows you to print the data anywhere you want when executing this command.
The data can be executed by the data execute command (ESC CR ! 12349 F).
When two devices are installed into the printer, the command saves the data on the device specified with the
select storage device command. When only one device is installed, the command saves the data on that device.
This command is only valid in PCL emulation.
Error
HL-1660e/2060/2400C:
43 CARD1 W ERROR
43 CARD2 W ERROR
HL-2400Ce/3400CN/2600CN/3450CN:
43 DEVICE1 W ERROR
43 DEVICE2 W ERROR
43 DEVICE3 W ERROR
APPENDIX B - FLASH/PCMCIA CARD COMMANDS - 14