Nikon CoolPix A300 Reference Manual page 166

Problem
Cannot edit
image.
Images are not
displayed on TV.
Nikon Transfer 2
does not start
when the camera
is connected to a
computer.
The PictBridge
startup screen is
not displayed
when the camera
is connected to a
printer.
Images to be
printed are not
displayed.
Cannot select
paper size with
the camera.
Technical Notes
Troubleshooting
Some images cannot be edited. Images that have already
been edited may not be edited again.
There is not enough free space on the memory card or in
the internal memory.
This camera is unable to edit images captured with other
cameras.
Editing functions used for images are not available for
movies.
Video mode is not correctly set in the setup menu.
The memory card contains no images.
Remove the memory card to play back images in the
internal memory.
The camera is off.
The battery is exhausted.
The USB cable is not correctly connected.
The camera is not recognized by the computer.
The computer is not set to start Nikon Transfer 2
automatically. For more information about
Nikon Transfer 2, refer to help information contained in
ViewNX-i.
With some PictBridge-compatible printers, the PictBridge
startup screen may not be displayed and it may be
impossible to print images when Auto is selected for
Charge by computer in the setup menu. Set Charge by
computer to Off and reconnect the camera to the printer.
The memory card contains no images.
Remove the memory card to print images in the internal
memory.
The camera cannot be used to select the paper size in the
following situations, even when printing from a PictBridge-
compatible printer. Use the printer to select the paper size.
The printer does not support the paper sizes specified by
the camera.
The printer automatically selects the paper size.
Cause/Solution
151
A
37, 64
–
–
–
87, 128
–
9
–
77, 129
77, 83
–
–
87, 129
–
9
–