Function - Hotpoint HM31AAE Service Information

Indesit Company

FUNCTION

ON/OFF STATUS
When the appliance is connected to the mains power supply, the 'plug' LED icon lights up; it switches
off when the appliance is unplugged.
The appliance switches on when the ON/OFF key is pressed. On switching on, a rising beep sounds.
Once on, pressing and holding the ON/OFF key for at least 3 seconds will switch the appliance off; a
descending beep will sound.
STAND-BY
The user interface never goes into STAND-BY when idle, although the user interface LEDs switch off
when the door is closed.
APPLIANCE ON
When the appliance is switched on, the set Fridge and Freezer temperatures are shown (not the actual
temperatures inside the cavities) and any other options configured.
When switched on for the first time, the following temperatures are set: '+5°C' and '-18°C'.
Each time it is switched on after that, the most recent user settings are retrieved.
SUPER COOL FUNCTION - KM31AAE
The Super Freeze and Super Cool functions can also be set at the same time.
Pressing the Super Cool button once enables the function and the relative LED/icon will light up.
The target fridge temperature remains on the DIGITS (+1°C).
The Super Cool function disables manually when the relative key is pressed again, when the appliance
is switched off, automatically after three compressor on cycles at a temperature of '+1°C', 12 hours (time
out) after activation or in the event of a fault or temperature alarm (A1 or A2).
SUPER FREEZE FUNCTION
The Super Freeze and Super Cool functions can also be set at the same time. The target Super Freeze
function disables manually when the relative key is pressed, when the appliance is OFF or automatically
at the end of the set time.
Service Manual UK English
10 of 29