Table of Contents
Advertisement
Operation
Video menu
Note
Depending on the input signal, one or more menu
items may not be selectable.
How to select picture mode
The picture mode provides the pre-defined video
settings:
User, Mild, Standard, Vivid
Press the MENU button and then use the
button to select the Video menu.
Press the
/ ENTER button and then use the
/
button to select
Press
the
/
button to select the option User,
Mild, Standard, Vivid
and Movie.
How to customize video settings
Press the MENU button and then use
button to select Video menu.
Press
the
/ ENTER button and then use
/
button to select the desired items.
Press
the
/ ENTER button and then use
/
button to adjust the setting.
Picture Mode
Select
the picture mode
(User/Mild/Standard/Vivid/
Movie
).
Brightness
This will adjust the light output of the complete
picture, which will mainly affect the darker areas of
the picture.
Contrast
This will adjust the intensity of bright parts in the
picture but keep the dark parts unchanged.
Color
This will adjust the saturation level of the colors to suit
your personal preference.
Tint
Allows you to select the color mix (Tint) of the picture.
Sharpness
This will adjust the sharpness of fine details in the
picture.
Note
Video adjustments are only available in the User
mode.
EN-15
Haier LED HDTV
and Movie.
/
Picture Mode.
the
/
the
the
If adjustments are attempted in any of the other
Picture modes the system will automatically switch
to the User mode.
Only when the picture mode is set to User can the
Brightness, Contrast, Color, Tint, Sharpness and
Color Temperature be adjusted. All other Picture
Modes are preset.
Color temperature
This will increase or decrease Warm (red) and Cool
(blue) colors to suit personal preferences.
Select Cool to give the white
to give the white colors a neutral tint, Warm to give
the white colors a red tint.
Advanced Video
To adjust the picture in advanced: DNR, MPEG NR,
Adaptive Luma Control, Flesh Tone, DI Film Mode, Blue
Stretch , Game Mode,
HDMI Mode
DNR: Digital Noise Reduction, adjust to reduce
the appearance of digitizing errror caused by
MPEG NR: To adjust the MPEG Noise Reduction:
Adaptive Luma Control: To adjust changes in the
luminance of the picture:
Flesh Tone:
Low or Medium.
DI flim mode: To set DI flim mode: Auto or off.
Blue Stretch: To set Blue Stretch: On or
PC Set
When you select the PC input, this function is used.
Adjustment for screen Position, Clock, Phase, Setting
Display adjustment menu by pressing the INPUT button
then use the
/
button to select the source of PC
item.
Auto Adjust : Automatically adjust the display of the
picture (Only available in PC source).
H. Position : Press the
the
/
button to adjust the horizontal position of
the picture.
V. Position : Press the
the
/
button to adjust the vertical position of the
picture.
Phase : Adjust the phase of
Clock : Adjust the clock of the input signal.
-36-
colors a blue tint, Normal
and Overscan.
Low.
/
button and then press
/
button and then press
the pixel
clock.
.
Advertisement
Table of Contents
