Screen Saver; Audio Setup Page; Spdif Setup; Dolby Digital Setup - Philips MCD703 Owner's Manual

2
Enter its submenu by pressing 2.
3
Move the cursor by pressing 3 4 to highlight
the selected item.
➜
On: Enable Closed Captions.
➜
Off: Disable Closed Captions.

Screen Saver

This function is used to turn the screen saver on
or off.
➜
On: In STOP, PAUSE or No DISC mode, if no
actions are performed about 3 minutes, the
screen saver will be activated.
➜
Off: Screen saver is disabled.

Audio Setup Page

The options included in Audio Setup page are:
"SPDIF Setup", "Dolby Digital Setup", "3D
Processing", "HDCD" and "Night Mode".
Night Mode

SPDIF Setup

The options included in SPDIF (Sony/Phillips
Digital Interface Format) Setup Page are: "SPDIF
Off ", "SPDIF/RAW" and "SPDIF/PCM".
System Menu Options
➜
SPDIF Off: Turns off the SPDIF output.
➜
SPDIF/RAW: If you have connected your
DIGITAL OUT (COAXIAL or OPTICAL) to a
multi-channel decoder/receiver.
➜
SPDIF/PCM: Only if your receiver is not
capable of decoding multi-channel audio.

Dolby Digital Setup

The option included in Digital Audio Setup is:
"Dual Mono".
Dual Mono
Select the setting that matches the number of
speakers you have connected.
➜
Stereo: Left mono sound will send output
signals to Left speaker and Right mono sound
will send output signals to Right speaker.
➜
L-Mono: Left mono sound will send output
signals to Left speaker and Right speaker.
➜
R-Mono: Right mono sound will send output
signals to Left speaker and Right speaker.

3D Processing

The option included in 3D Processing is:
"Reverb Mode".
Reverb Mode
Reverb mode provides a virtual surround sound
experience using just two speakers.
➜
Off, Concert, Living Room, Hall,
Bathroom, Cave, Arena and Church.
27