Sound And Volume Controls; Sound Control; Loudness; Volume Control - Philips MCD290 User Manual

Sound and Volume Controls

Sound Control

DBB, DSC and LOUDNESS sound features
cannot be activated at the same time.
DBB (Dynamic Bass Boost)
DBB enhances the bass response.
●
Press DBB on the remote to enable/disable
DBB feature.
➜
Some discs might be recorded in high
modulation, which causes a distortion at high
volume. If this occurs, switch off DBB or reduce
the volume.
DSC (Digital Sound Control)
DSC provides a different type of preset sound
equalizer setting.
●
Press DSC on the remote repeatedly to select:
CLASSIC, JAZZ, POP or ROCK.

LOUDNESS

LOUDNESS feature enables the system to
automatically increase the treble and bass sound
effect at low volume (the higher the volume, the
lower the treble and bass increase).
●
Press LOUDNESS on the remote to enable or
disable LOUDNESS feature.
➜
icon appears/disappears after this feature
is enabled/disabled.
32

Volume control

Turn the VOLUME control on the front panel
clockwise or anticlockwise or press VOL +/- on
the remote to increase or decrease the volume
level.
➜ "VOL XX" is displayed on the display panel.
"XX" denotes the volume level.
To listen through the headphone
●
Connect the headphone plug to the n socket
on the top of the back side of the DVD player.
➜
The speakers will be muted.
To switch off the volume temporarily
●
Press MUTE on the remote.
➜
Playback will continue without sound and
"MUTE" flashes.
●
To activate sound reproduction, you can:
– press MUTE again;
– adjust the volume controls;
– change source.