9
①
1) Lay the LOCKER of LCD PBA on top of LOWER, assemble the LOCKERS.
2) Lock the other LOCKERS as followed pictures of ③ , ④ , ⑤ .
※ Caution
- Assemble the UPPER and FRONT when slide is open.
- Take serious precaution when locking ① .
- Be careful not the slide F-PCB to be fold.
10
1) Screw the 4 point screws.
2) Put the screw cover on top of screws in upper
side.
②
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
④
③
11
Identification line to
check FPCB insertion.
1) Inserting slide F-PCB and soldering
※ Caution
- Make sure to check the Slide F-PCB insertion
exactly.
- Solder right and left F-PCB not the slide F-PCB
connector to move.
2-9
Main Electrical Parts List
⑤