Charging The Battery; Switching On And Off - Black & Decker CHV1210 Instruction Manual

Figure D - Hang the vac on the wall by placing the opening on the
base of the vac over the hooks in the wall mount bracket as shown in
gure D.
Figure E - Insert the jack plug into the
charging socket.

Charging the battery

From new, the rechargeable cells of the product need a minimum charge time of 24
hours to ensure full power.
We suggest you fully discharge the product when it is used for the first time as this will
help the cells recharge faster.
other position.
Figure F - Plug the jack plug of the charger into
the charging socket of the tool. Plug the charger
into any standard 120 Volt 60 Hz electrical outlet.
The charging indicator will be lit.
While charging, the charger may get warm, this
is perfectly normal and safe. It can remain on
charge indefinitely without damage or danger. It
with the charger provided.
the appliance is connected to the plugged-in
charger.
WARNING:
battery at ambient temperatures below 39°F
Use

Switching on and off

Figure G - To start, slide the On/Off switch
after use so that it will be ready and fully charged
for the next use. Ensure that the product is fully
engaged with the charger plug.
Do not charge the
5
E
F
G
D