Getting Started
7
The below menu will appear on the TV.
8
Press 1 to highlight
and press OK to confirm.
There will be no picture on your TV
at this state until you turn on the
progressive scan mode on your TV.
9
Turn on your TV progressive scan mode
(refer to your TV user manual.)
➜
The below menu will appear on the TV.
0
Press 1 to highlight
and press OK to confirm.
➜
The set up is complete now and you
can start enjoy the high quality picture.
The underlined option is the factory default setting.
TIPS:
To return to the previous menu, press 1. To remove the menu, press SETUP MENU.
22
001-053-hts8000-37-Eng14a
(continued)
If no picture:
G
Wait for 15 seconds for the auto recovery.
OR
1
Deactivate Progressive Scan feature by
pressing the EJECT on the DVD system.
2
Press 1 on the remote.
3
Press SUBTITLE on the remote.
➜
appear on the TV.
in the menu
Helpful Hint:
– There are some progressive scan TV and
High-Definition TV sets that are not fully
compatible with this DVD system, resulting in
the unnatural picture when playing back a
DVD VIDEO disc in the progressive scan
mode. In such a case, turn off the
progressive scan feature on both the DVD
system and your TV set.
in the menu
22
The blue DVD background screen will
7/2/05, 10:20 AM
3139 115 2xxx1