Cisco Aironet 1250 Series Manual page 27

Basic security settings are explained in the "Configuring the Access Point for
the First Time" chapter of the Cisco IOS Software Configuration Guide for
Cisco Aironet Access Points for the Cisco IOS release you are using.
The following security settings are available on the Express Security Setup
page.
• No Security
•
Static WEP Key
•
EAP Authentication
• WPA and WPA2
Advanced security settings are described in appropriate chapters of the Cisco
IOS Software Configuration Guide for Cisco Aironet Access Points for the
Cisco IOS release you are using.
Note The 802.11n radio only supports no encryption, WPA2 Enterprise,
and WPA-2 Personal. WPA-2 Enterprise and WPA-2 Personal
requires AES encryption.
Quick Start Guide: Cisco Aironet 1250 Series Access Point
27